Answered live, 24 hours a day

Heating repair in Georgetown, TX

No heat on the first cold morning, a furnace that starts then quits, or a bill that spiked over winter. Whatever your heat is doing, a local crew can find the fault and fix it. Our shop is on Halmar Cove off Williams Drive, so help is already in town.

(512) 910-3531 Schedule service

4,000+ verified five-star reviews from Central Texas homeowners

Williamson County Courthouse in Georgetown, Texas
4,000+ reviews Five star rated
Since 1984 40 years in Texas
BBB accredited A rated business
Licensed and insured Texas licensed
Upfront pricing Quoted before we start
Halmar Cove Georgetown office

Georgetown, TX

Why heaters fail on the first cold night

In Georgetown the heat sits unused for months, then the whole town turns it on the same freezing night. Here is why that is when heating faults show up, and what usually breaks.

  • 01

    A system that sits idle

    Heat gets little use most of the year, so a fault that developed months ago sits unnoticed until the first real cold snap. That is why the no heat call comes in a rush the first freezing week.

  • 02

    Gas furnace wear parts

    On a gas furnace the common failures are the hot surface igniter, the flame sensor, and the gas valve. They are the parts that keep a furnace from lighting or from staying lit, and they are usually a same visit repair.

  • 03

    Heat pump aux heat

    Many Georgetown homes heat with a heat pump plus electric auxiliary heat. A stuck aux strip runs the bill up, and a failed one leaves you short on heat in a freeze, so the fix depends on which system you have.

Before you call

What your heating is telling you

Here is what each heating symptom usually points to in a Georgetown home.

What you are seeingMost likely causeTypical fix
No heat at all Igniter, flame sensor, or gas valve on a furnace; a control or aux heat fault on a heat pump Test and replace the failed part
Blowing cool air in heat mode A heat pump reversing valve or defrost issue, or a furnace not igniting Diagnose the mode fault
Furnace starts then shuts off A dirty flame sensor or a limit switch tripping on airflow Clean or replace the sensor, check airflow
Heating bill spiked Aux heat stuck on, or a system running long to keep up Diagnose aux heat and the system
Burning smell on first use Dust burning off the heat exchanger, or a wiring or motor issue Confirm it clears, inspect if it does not
Blower runs but no warm air No ignition on a furnace, or a heat pump not in heat Diagnose ignition or the reversing valve

Call us now if

  • You smell gas near a gas furnace
  • A burning smell or scorch marks that do not clear
  • No heat in a freeze with an infant or an older adult in the home

It can wait until morning if

  • Heat that is a little weak but working
  • A first use smell that clears after a few minutes
  • One room cooler than the rest

Likely causes based on what we find most often in Georgetown homes. Your technician confirms the actual fault, and the price, before any work starts.

One trip, not three

The heating parts on every Georgetown truck

Most heating no starts come down to a short list of parts, and we carry them so the first cold snap repair finishes in one visit.

Igniters and flame sensors The most common furnace no heat parts
Gas valves and limit switches Controls that fire and protect the furnace
Heat pump defrost and aux heat For heat pump heating faults
Blower motors When air is not moving through the system

If a part is not on the truck, it is usually a short run back to the Halmar Cove shop, not a three day wait on a supplier.

Start to finish

How our heating repair works

Four steps from the first call to a warm house.

  1. Call the Georgetown line

    A person answers, not a queue. We get the details and get you on the schedule.

  2. Find the real problem

    We diagnose with instruments and inspection, so the fix is based on a fault we can show you, not a guess.

  3. Price in writing first

    You see what failed and what it costs before any work begins, and the number does not move.

  4. Do the work and prove it

    Most repairs finish in one visit. We test the result and show you it is right before we leave.

Quality Cooling, Heating & Plumbing in Georgetown

No surprises

What heating repair costs in Georgetown

Most heating repairs land between $150 and $600. You see the number before any work begins, and it does not move.

Typical repair

$150 to $600
  • Lower end. Igniters, flame sensors, and simple controls.
  • Higher end. Gas valves, heat exchanger, and heat pump parts.
  • Diagnostic fee quoted before the truck rolls.
  • Same price around the clock. No after hours surcharge.

What moves the number

Whether you have a furnace or a heat pump, the part that failed, and whether the fault is in ignition, controls, or the sealed system.

Straight from Google

What our Georgetown customers say

Over 4,000 five-star reviews from homeowners across Central Texas.

Heating service near you

Heating repair near you in Georgetown

Our shop is on Halmar Cove, west of I-35 off Williams Drive, so when the first freeze hits and everyone needs heat, our crew is already in town.

Georgetown

  • 106 Halmar CoveGeorgetown, TX 78628
  • (512) 910-3531Georgetown dispatch, answered live
  • Open 24 hours, seven days a week
  • Licence TACLB021422ETexas Department of Licensing and Regulation

Georgetown neighbourhoods we serve

Historic downtown Cimarron Hills Teravista Georgetown Village Sun City Berry Creek Wolf Ranch Serenada Rancho Sienna

Call the Georgetown office

Common questions

Frequently asked questions

Why won't my furnace turn on?

On a gas furnace it is usually the igniter, the flame sensor, or the gas valve, the parts that keep it from lighting or staying lit. On a heat pump it is often a control or aux heat issue. We test to find which before replacing anything.

How much does heating repair cost in Georgetown?

Most repairs run $150 to $600, depending on the part and whether you have a furnace or heat pump. We quote the diagnostic upfront and the total before starting.

Why did it fail the first time I used it this winter?

Because a heater that sits idle all year hides a fault until you need heat. The first cold snap is when it shows, which is why the no heat calls come in a rush that week.

My heating bill jumped, why?

On a heat pump, aux heat stuck on is a common cause. On any system, running long to keep up points to a fault or a system that is undersized or aging. We diagnose which.

Should I repair or replace my heating?

If it is 15 years or older and failing, or a repair costs more than about half a new system, replacement often wins. A cracked heat exchanger is a safety issue and a replace. We show you the math.

Do you offer emergency heating repair?

Yes, around the clock at the same rate. No heat in a freeze is something we prioritize.

24/7 emergency HVAC and plumbing

Ready for service from people who live in your community?

Call the Georgetown office or schedule your appointment online. We answer the phone at 2 AM the same way we answer it at 2 PM.

(512) 910-3531 Schedule service

Available 24 hours a day, seven days a week